AG glass parameters - thickness
Thickness refers to the distance between the upper and lower sides of the glass. Refers to the thickness of the object. The symbol "T" is in mm.
The thickness of the finished product of AG is based on the thickness requirements of the finished product of the AG. It provides various parameters. Our company evaluates whether it is achieved according to the parameter requirements. After the evaluation, the test piece is also required, and the parameters and thickness are measured to give the correct thickness tolerance.
Glass below 2mm has strict tolerance on thickness. According to the requirements of batch production of glass: customer requirements 1.85±0.15, 1.1±0.05. As for the use of thick glass production, our salesman can't draw conclusions, need to be proofed on production to verify and confirm. Original film thickness.
The normal control range of glass thickness tolerance of 2mm or more is 2.85±0.1, the thickness of normal raw glass is 3.2mm, the thickness requirement of 4mm or more is negligible, and the thickness requirement of glass customers above 2mm is not strict.
Thickness Measurements There are also measurement tools that measure the thickness of the finished product after etching.
