Qingdao Migo Glass Co., Ltd.
+86-532-85991202

The Production Process of Float Glass

Apr 06, 2022


1. Mixing of raw materials

The main raw materials of float glass are: 73% silicon dioxide, 13% sodium carbonate, 9% calcium oxide and 4% magnesium. These raw materials are mixed according to the proportion, and then small particles of recycled cullet are added.


2. Melting of raw materials

The prepared raw materials pass through a mixing chamber and then enter a kiln with 5 chambers for heating, and become glass melt at about 1550 degrees Celsius.


3. Forming of glass

The glass melt flows into the tin bath and floats on the molten metal tin liquid, and the temperature is about 1000 degrees Celsius at this time. The molten glass on the molten tin forms a glass ribbon with a width of 3.66 meters and a thickness of 3mm to 19mm. Because glass and tin have very different viscosities, the glass melt floating above and the tin liquid below do not mix together and form a very flat contact surface.


4. Cooling of molten glass

The temperature of the glass ribbon is about 600 degrees Celsius when it leaves the tin bath, and then enters an annealing chamber or a continuous slow cooling kiln to gradually reduce the temperature of the glass to 50 degrees Celsius. Glass produced by this slow cooling method is also called annealed glass.


5. Cutting and storage of glass

The glass after Xu cooling undergoes several stages of quality inspection and then is cut into different sizes for packaging, storage, or transportation.


float glass process