Chamfering edge:glass cutting winger,smooth edges and corners,and 45°angle to the glass surface, edge acuity 1mm wide,enhance mechanical strength and safety glass.
Chamfering belt rough grinding:After chamfering and grinding the edge of the glass,some bright sopots,flanges and slants remain on the end face of the direction of thickness.
Rough edge:After the edge of the glass is smoothed and chamfered,there is no residual flange and slant on the end face of the thickness direction,allowing a small amount of bright spots that do not affect the strength of the glass.
Polished edge:the edge of the glass is processed by chamfering,grinding and polshing.The edge is smooth,transparent and free of bright spots,with good finish.
Processing of the glass edge:
After cutting the glass to the required size,edge finishing can be done mechanically or manually. safety and security is primary goal where edge finishing is concerned,then to improve functionality and appearance.
There are a huge variety of edge finishing options:
Bevel-the edges are wholly or partially bevelled;satin finished edge-the edge has been processed with specific tools.The edge finish is matte and traces left by the diamond disc cannot be seen with the naked eye.
