Solar thermal collectors and photovoltaic modules are normally covered by glass sheets as a pro -tection against weathering effects,as insulation or re-inforcing element.The efficiency of these produc -ts is significantly dependent on the quality of the glazing,because all solar radiation has to be transmi -tted through the glazing before its transoformation to thermal or electrical energy.On the whole,cove -rs are made out of special solar glass whose distinctive feature is purity in terms of chemical composi -tion.This feature alone makes it possible to achieve a considerably higher light transmission(available energy)than that achieved with normal glass.To the naked eye a good solar glass is hard to distinguis -h from regular window glass.The effectiveness of a thermal collector or a PV module not equipped wi -th a solar glass cover may therefore be reduced by several percentage points.
The correct measurement of light transmission is very expensive and requires special spectrometer -s,sensors and a good deal of experience.
The measurement of structured glasses that are often used in solar energy products is particularly challenging.Also the incident angle dependent transmission can have a significant impact on the annu -al energy gains of solar installations and therefore should bu implicitly considered.SPF is able to prov -ide you with the required equipment to make these measurements.






