How are balcony glass fences installed
Balcony fence glass plane installation points:
The balcony guardrail glass must use tempered glass or laminated glass. The thickness of the tempered glass should not be less than 13 mm. The glass must not be in direct contact with the rigid nodes. There should be an elastic material pad between the two. When designing a glass guardrail with two sides, There should be a gap of more than 3 millimeters on each side of the slot in which the glass extends into the column. The gap is filled with glass sealant, and the gap in the glass is not less than 13 mm.Balcony fence glass base pillar installation points:
The base of the glass guardrail is the key part of the fixed guardrail. It is necessary to use angle steel processing to form a glass fixing member. Both sides of the fixing member are fixed with expansion screws on the floor or with welding and pre-connection. They are not loose. The bottom of the groove is cushioned with a rubber support block with a hardness of 80-90. The depth of the glass extending into the fixing piece is more than 10 mm. The glass extending into both sides of the fixing piece (that is, between the angle steel and the steel plate) should be 3-6 mm. The gap is cushioned with neoprene sheet and the glass is clamped. A gap of about 6 mm needs to be left between the steel plate and the glass, and a gap of about 6 mm must also be left between the glass and other materials. The gap is sealed with glass sealant. Filling. After the installation is completed, check the safety and firmness, and cover the surface of the base of the guardrail. It should be noted that the covering material must not directly contact the glass, and the gap left between the covering material and glass also needs to be filled with glass sealant.
