tennis padel court fence

In order to ensure that these glass components remain intact during transportation and installation, packaging is a crucial link. The glass packaging of cricket stadiums has an importance that cannot be ignored. This design not only enhances the aesthetics of the glass but also plays a key role in functionality and safety. Glass packaging provides customers with a clear view. Customers can verify the glass quality through the packaged cricket stadium glass. Security is another important aspect of glass packaging design. The application of modern technology makes these glass products not only strong and durable but also resistant to bad weather, ensuring the safety of the venue.

The following is a detailed introduction to the packaging process of padel court glass.

 

Type of glass	tempered glass and  laminated glass
Glass thickness:	10mm, 12mmm and 13.52mm(6mm+1.52PVB+6mm)
Glass size:	1995*2995 and 1995*1995
The number of glass Countersunk holes:	6,8 and 10
Packaging type	Seaworthy wooden crates, or iron frame Use anti-mildew paper or soft cork pads to separate glass sheets to avoid physical scratches

 

In terms of packaging:

Migoglass have 2 packing methods, one is 9 glass pieces in a crate, and the other is 18 glass panels in a crate.

For 10mm,

if 9pcs/crate, one 20ft container can load 144 pcs, that is for the construction of 8 padel courts;

if 18pcs/crate, one 20ft container can load 162 glass pieces, for the construction of 9 padel courts

For 12mm glass:

if 9pcs/crate, one 20ft container can load 126 pcs, that is for the construction of 7 padel courts;

if 18pcs/crate,one 20ft container can load 144 glass pieces, for the construction of 8 padel courts.

 

 

Before packaging, each glass component needs to undergo rigorous inspection and preparation. First, the manufacturer will conduct a detailed quality inspection of the glass, including:
Visual inspection: Check whether there are cracks, bubbles or other defects on the surface of the glass.
Dimensional inspection: Ensure that the size of each piece of glass meets the design requirements.

Next, the glass components will be pre-processed to ensure safety during packaging:
Edge processing: Polish the cut edges to eliminate sharp edges and prevent injuries during handling.
Surface cleaning: Clean the glass surface with professional cleaning fluid to remove dust and dirt to maintain the transparency of the glass.

 

 

The packaging materials of the glass need to be protective and cushioning to prevent damage during transportation. Commonly used packaging materials include:
Foaming materials: such as foam plastics or polystyrene foam boards, used to wrap glass, provide a good cushioning effect.
Bubble film: used to wrap the surface of the glass to reduce vibration and impact.
Cardboard: Used to reinforce packaging, cardboard interlayers are usually added to the packaging box to prevent the glass from touching each other.

 

 

Preliminary packaging: Wrap the glass with bubble film or foaming material to ensure that the surface and edges of the glass are protected. Pay special attention to the edges of the glass, as this is the most vulnerable area.
Intermediate protection: After the glass is wrapped, use cardboard or other isolation materials to form a protective layer between the glasses. This layer of isolation material can prevent the glass from moving in the packaging box and reduce the risk of collision between each other.
Packaging: Put the wrapped glass into a dedicated packaging box. The packaging box should be designed according to the size and weight of the glass to ensure that it can withstand the pressure during transportation. Each packaging box should be reinforced to ensure that it will not be damaged during transportation.

 

 

In order to ensure correct handling and management during transportation, each packaging box must be clearly labeled and labeled. These labels include:
Content description: Indicate the type, size and quantity of glass in the box.
Handling instructions: Such as "fragile items", "please handle with care", etc., to remind the handling personnel to pay attention.
Manufacturer information: including the manufacturer's name, contact information and production date.

 

 

Transportation and storage
After packaging, the glass components will be transported to the construction site. Special attention should be paid during transportation and storage:
Transportation method: Use appropriate transportation tools, such as dedicated glass transportation vehicles, to ensure that they are not subject to vibration or impact during transportation.
Storage conditions: During transportation or at the construction site, the glass should be stored in a dry and stable location to avoid direct exposure to sunlight or extreme weather conditions.

 

 

After arriving at the construction site, conduct the final inspection before installation:
Inspect the packaging: Make sure that the packaging is not damaged during transportation and the glass components are not damaged.
Inspect the glass: Re-inspect each piece of glass to confirm that it is free of defects and meets the design requirements.

Hot Tags: tennis padel court fence suppliers China, manufacturers, factory, wholesale, customized, cheap, buy discount, in stock, price, made in China