3.2mm Toughened Ar-Coating Float Solar Glass for Solar Cell with ISO, SPF, SGS

3.2mm Toughened AR-Coating Float Solar Glass for Solar Cell With ISO,SPF,SGS, combined with nanometer anti-reflective coating technology, increase solar transmittance by way of decreasing light reflectance and improve the solar  cell phtotelectric conversion efficiency.Meanwhile,it reduces the reflected glare of the glass and the pollution caused by the reflectance to the environment. The hydrophobic behavior of the AR coating could in some degree protect the dust and dirt from shading the light and improve the cleaning performance of the glass. With the outstanding characteristics of  high solar light transmittance, low reflectance, low iron, t high mechanical strenght and the high flatness, it is one of the indispensable important parts of solar cell and has been widely used for photovoltaic power generation all over the world.

 

 

Features:
1.     High solar lights transmittance
2.     The low reflectance: visible light reflectance is less than 7.30%
3.     Low iron:glass has only 0.012% of iron content;
4.     High intensity,the strength is 3-5 times of ordinary annealed glass
5.     Wind pressure resistance: the wind pressure resistance is 1.5-3 times of ordinary annealed glass;
6.     Heat shock resistance: the heat shock resistance is 3 times of ordinary annealed glass;

7.     Safety:if it is broken, it usually breaks into relatively small pieces, which are less likely to cause serious injury.